MOBILE REPAIRING GUIDES

-
Nokia 114 White Display Solution Ways With Jumper

Nokia 114 White Display Solution Ways With Jumper

 10:56
Hello friends today i am going to share a very useful tutorial. This tutorial will help you to solve Nokia 114 white display solution ways...
Nokia 107 LCD Light Problem Solution Ways Jumper

Nokia 107 LCD Light Problem Solution Ways Jumper

 08:02
This article will help you to how to solve Nokia 107 LCD display light problem by making simple jumper. First of all make sure your phone ...
Micromax A35 Hard Reset Or Pattern Lock Remove Solution

Micromax A35 Hard Reset Or Pattern Lock Remove Solution

 20:22
Micromax A35 Hard Reset First of all boot your Micromax A35. Press volume down and power button for few seconds (10 to 30 Sec). Conn...
Samsung Gt-S5830I Charging Ways Repair Solution

Samsung Gt-S5830I Charging Ways Repair Solution

 20:20
Samsung gt-s5830I charging ways repair solution. If you want to repair your Samsung gt-s5830I charging ways, then you are comin...
Nokia 206 Lcd Light Problem Solution With Jumper

Nokia 206 Lcd Light Problem Solution With Jumper

 20:19
Nokia asha 206 lcd ligh problem solution with jumper. If your Nokia 206 lcd ligh not working or not coming, and you want to 

Comments

tateearle said…
3d titanium i phone case, 5-Star gold case - Technia Games
3d nano titanium by babyliss pro titanium i phone case. This case has the latest design features of a solid joico titanium design, and titanium blue ps4 controller features a padded ceramic vs titanium flat iron handle which exposes the titanium sheet 2.
5 March 2022 at 02:43
Post a Comment

Popular posts from this blog

SONY Trinitron KVG14Q2 Repair Help FROM MY SERVICE TABLE TODAY

-
Image
TDA8374A  (Chroma) _STR S6707  (SMPS switching) _LA7830  (Vertical Scan Output IC) _ Sharp PQ 09RE 11  (9V controlled voltage regulator IC)  _ 2SD1877  (Horizontal Scan Output Transistor) _NX1733/m  (FBT/LOT) Set received for repair with no picture condition; today . On power ON, the standby LED blinks 3 times and then shuts off. As the standby LED blinks, at least once time, it is clear that the SMPS section circuit to this set is working properly.  But, the main system control mcro-computer IC detects something short circuit with any component/s at the main board. As the set is a very old model, the spare part availability will be somewhat difficult.  So; I should take much care with work; not to damage more components.  I opened the back cover.  A visual inspection is done for any damaged component/s on-board.  Such as bulged/shorted capacitors, damaged IC/s and such. I found that the vertical scan output IC is cracked.  I’ve attach
Read more