1000W ICs audio amplifier with PA03

-
This is a series of amplifiers are based on the most high-ic power that I have ever known. Because the output is issued up to 1000 watts with the impedance RL 4Ohm. Current supply 120mA, and 30A output current. Minimum input voltage of about 30V and a maximum voltage up to 150V.
This is an audio amplifier that I have come across use ICs that maximum voltage up to 150V and output power up to 1000W , the scheme below gan.
1000W ICs audio power amplifier


Part List
Resistor
R1 = 10K
R2 = 10K
R3 = 220K
R4 = 0.18R 5W
R5 = 2.2R 2W
R6 = 0.18R 5W
Capacitor
C1 = 1uF
C2 = 1000uF
C3 = 68pF
C4 = 1000uF
Inductor
L1 = 4MH
IC
U1 = PA03

Comments

Post a Comment

Popular posts from this blog

SONY Trinitron KVG14Q2 Repair Help FROM MY SERVICE TABLE TODAY

-
Image
TDA8374A  (Chroma) _STR S6707  (SMPS switching) _LA7830  (Vertical Scan Output IC) _ Sharp PQ 09RE 11  (9V controlled voltage regulator IC)  _ 2SD1877  (Horizontal Scan Output Transistor) _NX1733/m  (FBT/LOT) Set received for repair with no picture condition; today . On power ON, the standby LED blinks 3 times and then shuts off. As the standby LED blinks, at least once time, it is clear that the SMPS section circuit to this set is working properly.  But, the main system control mcro-computer IC detects something short circuit with any component/s at the main board. As the set is a very old model, the spare part availability will be somewhat difficult.  So; I should take much care with work; not to damage more components.  I opened the back cover.  A visual inspection is done for any damaged component/s on-board.  Such as bulged/shorted capacitors, damaged IC/s and such. I foun...
Read more