procedures to follow in order to reboot Tecno smart phone

-
  •   Switch off the phone first.
  •   Press and hold the Power key and the Volume Up key in the meantime and it hold up until you see a Menu show up on the screen before you remove your hand from the two buttons.
  •   On the Menu, you will see a choice that shows DATA Wipe/factory RESET.
  •   Utilize the volume keys to scroll down and up, select the DATA Wipe/factory RESET with the Power key.
  •   An alternate Menu choice will show up and you will see an arrangement of NO’sarranged vertically so scroll down with the assistance of your volume key and selectDELETE ALL USER DATA.
  • At that point utilize the Power key to select it and sit tight for the procedure to finalize.
  • When it is carried out, you will be taken to the first Menu then scroll to REBOOT PHONE NOW and utilize the Power Key to Select the choice and sit tight for your phone to REBOOT.

Comments

Post a Comment

Popular posts from this blog

SONY Trinitron KVG14Q2 Repair Help FROM MY SERVICE TABLE TODAY

-
Image
TDA8374A  (Chroma) _STR S6707  (SMPS switching) _LA7830  (Vertical Scan Output IC) _ Sharp PQ 09RE 11  (9V controlled voltage regulator IC)  _ 2SD1877  (Horizontal Scan Output Transistor) _NX1733/m  (FBT/LOT) Set received for repair with no picture condition; today . On power ON, the standby LED blinks 3 times and then shuts off. As the standby LED blinks, at least once time, it is clear that the SMPS section circuit to this set is working properly.  But, the main system control mcro-computer IC detects something short circuit with any component/s at the main board. As the set is a very old model, the spare part availability will be somewhat difficult.  So; I should take much care with work; not to damage more components.  I opened the back cover.  A visual inspection is done for any damaged component/s on-board.  Such as bulged/shorted capacitors, damaged IC/s and such. I foun...
Read more